ADIC FileServ Version 4.0 600716 Rev A manual Maximum number of drives allowed

			Administrative Tasks
	Parameter	Default	Definition
FS_MAX_ACTIVE_		1	Maximum number of drives allowed
FORMATS			to perform tape formatting at one
			time.
FS_MAX_ACTIVE_		1	Maximum number of drives allowed
MEDCHECKS			to perform media checking at any
			one time.
STORE_LIMIT_NOTICE		1	If FileServ is started up when the
			storage used is within this number of
			GB from the storage limit, notice is
			sent to FS_OWNER_ID.
FS_CALLOUT_SLEEP_INT		2	A file can be accessed by one
			process at a time. This parameter
			represents the time to wait (in
			seconds) before the next retry if
			callouts are suspended because of
			a file busy. (For tuning, refer to note
			in parameter
			MAX_DMON_SUSP_ERRORS.)
MAX_DMON_SUSP_ERRORS		60 two-second	Maximum number of retries in
		retries	response to a suspend failure. The
			command sleeps between retries for
			the number of seconds specified in
			FS_CALLOUT_SLEEP_INT. A suspend
			failure can occur for a file if:
			• The file has already received a
			callout.
			• The maximum number of
			suspends is already reached.

System Tasks

600716 Rev A System Tasks 1-31