ADIC FileServ Version 4.0 600716 Rev A manual None

Administrative Tasks

If the system administrator does not log on as root, change the CLASS_USERID to default to the user ID of the user who is available for mail notification of actions that are required by FileServ.

Parameter	Default	Definition
CLASS_USERID	fsadm	Default userid. Any valid userid can be
		used. This is the default for the E-mail
		Notify ID.
CLASS_ACCTNUM	12345	Default account number. One to five
		alphanumeric characters can be entered.
CLASS_SCODE	NONE	Default security code. One to four
		alphanumeric characters can be entered.
CLASS_SOFTLIMIT	8	Default warning limit for the number of
		media in a class. The warning is issued
		when the number of media are allocated
		to the class. The default number can be
		changed when setting up the class.The
		number can also be modified for an
		existing class with the fsmodclass
		command.
CLASS_HARDLIMIT	10	Default hard limit for a class. Additional
		media is not allocated for the class when
		this limit is reached. The default number
		can be changed when setting up the
		class by using the fsaddclass
		command. The number can also be
		modified for an existing class with the
		fsmodclass command. The classes
		value must be greater than the value for
		the CLASS_SOFTLIMIT.
CLASS_MTIME	10	Default minimum time (in minutes) since
		a file was last accessed. A file is eligible
		for policy application (store or cleanup)
		after mintime. The number can also be
		modified for an existing class with the
		fsmodclass command.

System Tasks

600716 Rev A System Tasks 1-37