ADIC FileServ Version 4.0 600716 Rev A manual Dir1 Dir2 Dir6

AdministrativeTasks

In the figure below, the fsrollup command fails to roll up to dir1 from dir2 because dir6 is not a migration directory.

Before Rollup

/dir1

dir2

dir6

DataClass A

dir3 dir4 dir5 dir7

	DataClass A
			/dir1	dir6
After the command			dir2
fsrollup /dir1/dir2	DataClass A
	dir3	dir4	dir5	dir7

The fsrollup function is performed on only one hierarchical directory level at a time. Roll up of a DataClass group to a directory that is two or more levels above an upper boundary directory of the DataClass group is not allowed. The user cannot roll up past a file system mount point. The specified directory contains only subordinate directories and no other files.

Perform this adjustment before many files are stored to the directories.

Step 1. Verify that the rollup does not cause contention with other migration directories

Step 2. Run the fsrollup command.

2-18 Operating Tasks 600716 Rev A