AdministrativeTasks
2-26 OperatingTasks 600716 Rev A
Modify File
Attributes Files that reside in directories associated with a DataClass
group have two types of attributes:
• Attributes that specify the number of copies of the file to
store.
• Attributes that designate how policy is applied.
The default setting for these attributes are acquired from the
DataClass group defaults set by the system administrator when
the DataClass group is defined.
DataClass group attributes are modified on a file-by-file basis
using the fschfiat command.
#########################################################################
#The following is a sample line which has been commented out
#myclass 30 1000 30 50 150
#
#########################################################################
#
# Never ever change the entry for default unless specifically
# directed by technical support personnel.
#############################################################################
#
# $LOG$
#
######################################################################
# $Id: cluster.config,v 5.1.0.2 1999/06/21 19:41:14 johnb Exp $ $ADIC
*
#######################################################################
<default> 20 1000 30 50 150
Note
For more information on the fschfiat command, refer to
the Command Reference book.