Startup and Shutdown | ADIC FileServ Version 4.0 600716 Rev A

Administrative Tasks

Startup and Shutdown

Normal Startup

The following startup modes exist for FileServ:

•Normal. A normal termination allows a request to continue to a known processing state. When a normal termination is unsuccessful, contact technical support personnel to assist with the correction. If termination exits with a message that the system abnormally terminated, contact the technical support personnel.

•Contingency. A contingency start is only recommended when a normal start fails.

Both types of startup are described below.

A normal startup is performed following a graceful termination of FileServ. A normal FileServ startup performs the following tasks:

•Reinitializes the system parameters.

•Performs command recovery processing using the recovery processing information retained after termination.

To normally start or terminate FileServ, the system administrator runs the FileServ command. This command must be issued from a login to the host computer.

This command can also be included in a script that is run automatically at the time of the host computer initialization. The FileServ command will automatically starts FileServ each time the server is restarted.

The licensed subsystems must be configured before startup or FileServ will fail to start.

1-22

System Tasks

600716 Rev A

Image 38

ADIC FileServ Version 4.0 600716 Rev A manual Startup and Shutdown, Normal Startup

Contents

Administrative Tasks FileServ Version February Rev a Trademark Notice East Peakview Ave Englewood, CO 80111 USA Phone FAX Reader Comment Form Page Contents Administrative Tasks Operating Tasks Administrative Tasks Utilities Index Preface Preface Troubleshooting Tools Troubleshoot operating problems Are listed below ConventionsConventions used throughout the FileServ technical books Su root Books Online Books Contact Publications Department Secured Web Site RelatedPublications Publications described in the table below are created System Tasks Roadmap Topic Refer To Chapter Access the Host Server FileServ Interface to VolServ Drive Pools Library AssociateMediaClass with Define DataClass Groups These files are stored using the fsstore command Associate Directories Media Under FileServ Management Policies CreateMigration Tape Routine Processing Part of the FileServ system routine processing includes Chkpoint.pl Script checkpoints the Raima database database recovery isFaster and more reliable when regular checkpoints are taken CheckDBALL # $FSHOME/util/checkDBAll tempfilename DailyMonthly Bi-weekly KeyBuildAll Utilities that operate on specific file systems are Command Line Mode Options Description Frequency of Use # su root # $FSHOME/util/fsrecover Trashcan Cleanup System Tasks Startup and Shutdown Normal Startup Contingency Startup RecoveryProcessing Run the FileServ -ccommand FileServ -c Normal Shutdown # ps -elf grep fs # ps -elf grep fsadm Managing System Configuration System Tasks System AdministrationGeneral Parameters Parameters Filelblfmttape DLT Maximum number of drives allowed Parameters can be tuned, if Maximum number of retries for any Maxtapetotapeallocti Threshold value when equalled or YES None Default media type D2S, D2M, D2L Following list shows parameters that are used by the file Retry the commandFile Retention Comment keyword search and file expiration processes. To VolServ-specific Following parameters are specific to the VolServ system Completely reinitialized and reinstalled InstallationInstallation script for this purpose Following list shows the system parameters that are to be Default component ID only for Maintenance Software Following list shows parameters that can be modified, as Media StatsLogging Parameters Fsfacility Edit System Configurable system parameters are modified by editingEdit the fssysparm file using a text editor FileServ system parameters $FSHOME/fssysparm file Recycle FileServ by running the command below An example for the Classmtime parameter is shown below Administrative Tasks Add a Library Edit Device Delete a Device Generate Report Run the fsconfig commandFsconfig Fsconfig command can configure various drives. Change Component State Drive Names Supported Drives Supported Media Media Types Unavail Maint OFF Unknown Add and Delete Drives Tasks Cshrc Reallocate Drives Using a text editor, open the fssysparm fileFine-tune Parameters Located in the $FSHOME/sysparms directory Identified in the table below Modify any of the default tape utilization parametersModify Tape Usage Redirect Policy Applications Administrative Tasks Operating Tasks Topic Refer To DataClass Management Special DataClass Groups Topic To create a DataClass group, follow the steps below Fsaddclass prodclass Use fsclassinfo to compare each DataClass Run the fsmodclass command and specify aDataClass group name Group parameter. Then either change the class Remove Group with fsrmclass Command Table below describes the report’s fields Fsclassinfo lowtwr6 -l Operaitng Tasks Relation is added with the fsaddrelation operation Add Relations with fsaddrelation CommandManipulate Relations Associate New Data with New Relations Associate New Directories with Files Dir1 Use the Unix ls command to verify that Directory to be associated already exists Fsaddrelation production -c england Fsdump -f /arch1/site1production.dumpfile /site1/production Fsrmrelation production Run the fsrmrelation commandSpecify the name of the directory to disassociate Change Relation Points Roll Up DataClass Groups Dir1 Dir2 Dir6 Fsrollup production Dir7 Fsrolldown production Fsdirclass /production Links File ManagementPathname FileServ supports hard links and soft links Spanning Clustering Operaitng Tasks Modify File Attributes Fschfiat -i test1 Generate Report Operaitng Tasks File Cleanup Data Migration Cleanup policies using the fspolicy command with various Rather, the planned execution of migration and disk cleanupPolicies as well as the DataClass characteristics provide Time parameters does not establish the DataClass migration Storage Policy Example only ######################################################## Cleanup Policy Overflow Policy Running as a cron Event Minutes hours day-of-month month day-of-week command 1,15 AdministrativeTasks Storing Retrieving Data Store Files Operaitng Tasks Name Clean Up Data from DiskCleanup by File Secondary Files Cleanup byCopy DataClass General Storage Processing Operaitng Tasks Retrieve Files Operaitng Tasks For more information on the fsundelete command, refer to Operaitng Tasks AdministrativeTasks Retrieve Partial Files Delayed Dismount Operaitng Tasks Media Management Media ServicesVolServ performs media services to manage the physical Libraries and movement of media Media Class Type Definition Load and Unload Media Remove Media Add Blank Media Import command and the MediaClass Marred when the media is entered, the media isMedia are entered by the VolServ operator using Run the fsmedin command with the -boption Media Fsmedout command allows the removal of blank mediaRemove Blank Remove Blank Media Format Media Media Duplication Copy Media Media States Copy Files State Description Storage Limit Generate Media Reports Fsmedinfo -l feu002 Blank pool Media ListFor media in all DataClass groups and media in the general Fsmedlist -c testclass Each of the categories previously described. If no -loption generates a longer report shownBelow that includes the identifiers of the media for Options are specified, all of the media identifiers AdministrativeTasks Utilities Utilities Autostart UtilitiesFspic Scripts Dbcheck Extension To determine the name of the databaseDirectory for files ending with the .dbd Keybuild Trouble- shooting Tools Trouble- shooting Tools Data Retrieval Fails Commands that ID Problems Disaster Recovery Messages Status Messages Extract Syslog Messages Log File Maintenance Syslog Messages Set Up FileServ Logging Change directory cd to the directory where the log Issue the Unix tail command of the fileDetermine the log file where you can extract Run the fsextlog command specifying the log Recover Data Xfscheck /dev/dsk/dks2d6s7 Restore Data Run the xfsrestore command Data restored from tape by using the Unix dfCommand /arch3 file system is used throughout this Example Xfsrestore -f /dev/rmt/tps0d3 /arch3 If the procedure fails, call technical support Use the Unix mkdir command to create the parentRerun the fsaudit -r -f command Run the keyBuildAll utility to update the key Run the xfsrestore -i command Add home add mrktg add junk Extract Cd ../trunccandidates Database maintenance compares Unix file system Fsaudit command serves two purposesRecovery of file systems File System Recovery Running fsaudit CommandDatabase Rev a Trouble- shooting Tools Troubleshoot System Performance Reports Report Media Fragmentation Report Class Media Movement Report Fsmoverpt Table below lists the Request Types and State fields Fsqueue History Report Component Statistics Report Fshistrpt -h V0, 10, V0, 11, V0, 12, V0, 13, V0 Hardware Configuration Report Fschstate Drive Contact Technical Support Administrative Tasks Index INX-2 INX-3 Commandextractheader Commandinfodetail -43 Commandlogging Connectretries -32 Connectsleeptime Deffileretentionperiod Percentfulltomigrate