ADIC FileServ Version 4.0 600716 Rev A manual Administrative Tasks

Administrative Tasks

The UNIX device drivers provide the means to reconfigure devices for the standard peripherals (disks and system console). To reconfigure these components, refer to the applicable platform manual.

Edit Devices with After installation, the system administrator can add or remove

fsconfig Command devices from the configured storage system.

The fsconfig command provides hardware component configuration. By specifying the proper options and the accompanying values, hardware components can be added, modified, or deleted from the system to reflect the actual physical configuration.

Note

The fsconfig command does not allow duplicate device pathnames in the database.

For more information on the fsconfig command, refer to the Command Reference book.

The component identifier is a required value to add, modify, or delete hardware. When adding a new drive or subsystem component, the component identifier, component type, and component alias are required values. The component identifier cannot be modified. When deleting a subsystem, the drives must be deleted before the subsystem can be deleted.

1-48 System Tasks 600716 Rev A