AdministrativeTasks
600716 Rev A Operating Tasks 2-63
Operaitng Tasks
Copy Files The fsfilecopy -r command functions like the
fsmedcopy command, except it replaces specified files,
instead of the entire media.
A single file from media or several files from several media can
be replaced. The only restriction is that all files must be in the
same DataClass group. Specified files from the original media
are moved onto either a blank media, specified media, or a
different media type not defined by the DataClass group. Only
active files can be copied. No trashcan contents are copied.
Media States FileServ supports the following tape media:
• 3490, 3490E, and 3480.
•D-2.
• 8590.
• CTIII and CTIV.
Media can be placed in various states by the fschmedstate
command.
The fsmedinfo report can be used to determine the present
state of media, count of suspect errors, and how media is
managed.
Note
For more information on the fsmedinfo command, refer to
the Command Reference book.