Chapter 6: Command Line Console Management
4. Example:
The following example restores default setting of the Hardened Ethernet Extender Switch:
switch_a#restore default
switch_a#
Auto Save:
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode). The switch_a(config)# prompt will show on the screen.
switch_a(config)#
2. Usage:
Use this command to enable auto save configuration function. The configuration will be automatically saved at every configured interval while this command is enabled. Use the no form of this command to disable this feature.
3.Command Syntax: service
4.Example:
The following example enables or disables auto save configuration to Hardened Ethernet Extender Switch:
switch_a(config)#service
switch_a(config)#no service
switch_a(config)#
Auto Save Interval
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode). The switch_a(config)# prompt will show on the screen.
switch_a(config)#
Page 122 |
| LB308A |
|
|
