Black Box LB308A user manual Command Line Console Management

Chapter 6: Command Line Console Management

4. Example:

The following example enables or disables the multiple-spanning-tree on bridge GROUP (1):

switch_a(config)#bridge 1 multiple-spanning-tree enable

switch_a(config)#no bridge 1 multiple-spanning-tree enable bridge-forward switch_a(config)#

Rapid Spanning Tree Protocol:

1. Command Mode: Configure mode

Logon to Configure Mode (Configure Terminal Mode). The switch_a(config)# prompt will show on the screen. switch_a(config)#

2. Usage:

Use this command to enable the Rapid Spanning Tree protocol on a bridge.

Use the no form of the command to disable the Rapid Spanning Tree protocol on a bridge.

3. Command Syntax:

bridge GROUP rapid-spanning-tree enable

no bridge GROUP rapid-spanning-tree enable BRIDGE-FORWARD GROUP <1-1> Bridge group name used for bridging.

BRIDGE-FORWARD Puts all ports of the specified bridge into the forwarding state.

4. Example:

The following example enables or disables the rapid-spanning-tree on bridge GROUP (1):

switch_a(config)#bridge 1 rapid-spanning-tree enable

switch_a(config)#no bridge 1 rapid-spanning-tree enable bridge-forward switch_a(config)#

Spanning Tree Protocol:

1. Command Mode: Configure mode

Page 142 724-746-5500 blackbox.com LB308A