Black Box LB308A, 8-port 10/100base-tx hardened ethernet extender switch user manual Vdsl

Chapter 6: Command Line Console Management

3. Command Syntax:

dot1x timeout re-authperiod SECS no dot1x timeout re-authperiod

SECS <1-4294967295> Specify the seconds between reauthorization attempts. The default time is 3600 seconds.

4. Example:

The following example specifies to set the interval 25 seconds between reauthorization attempts:

switch_a(config)#interface fe1

switch_a(config-if)#dot1x timeout re-authperiod 25 switch_a(config-if)#

6.11 VDSL

VDSL Configuration, VDSL Status, VDSL Counters

VDSL Configuration

VDSL Ports:

VDSL Retrain:

1. Command Mode: Interface mode

Logon to Configure Mode (Configure Terminal Mode).

Then logon to Interface mode.

vdsl1 means Ethernet Extender port 1.

The switch_a(config-if)# prompt will show on the screen. switch_a(config)#interface vdsl1 switch_a(config-if)#

2. Usage:

Use this command to upgrade VDSL speed for Ethernet Extender port.

3.Command Syntax: vdsl retrain

Page 182 724-746-5500 blackbox.com LB308A