Chapter 6: Command Line Console Management
Table 6-3. VDSL fixed rates.
Rate
1 | Set fixed rate to 1 Mbps |
|
|
3 | Set fixed rate to 3 Mbps |
5Set fixed rate to 5 Mbps
10Set fixed rate to 10 Mbpss
15Set fixed rate to 15 Mbps
20Set fixed rate to 20 Mbps
25Set fixed rate to 25 Mbps
30Set fixed rate to 30 Mbps
40Set fixed rate to 40 Mbps
50Set fixed rate to 50 Mbps
4. Example:
The following example specifies to set fixed rate bandwidth settings (50) in the symmetric mode for Ethernet Extender port 1 (vdsl1):
switch_a(config)#interface vdsl1
VDSL Status
1.Command Mode: Exec mode Logon to Exec Mode (View Mode).
The switch_a> prompt will show on the screen. switch_a>
2.Usage:
Use this command to show Ethernet Extender port status.
3. Command Syntax:
show vdsl status interface IFNAME IFNAME Interface name.
LB308A |
| Page 187 |
|
|
