Command Line Console Management | Black Box LB308A manual

Chapter 6: Command Line Console Management

Port Authentication

Authentication State:

1. Command Mode: Interface mode

Logon to Configure Mode (Configure Terminal Mode).

Then logon to Interface mode.

fe1 means port 1.

The switch_a(config-if)# prompt will show on the screen. switch_a(config)#interface fe1

switch_a(config-if)#

2. Usage:

Use dot1x reauthetication command to enable reauthentication on a port. Use no dot1x reauthetication command to disable reauthentication on a port.

3. Command Syntax:

(no) dot1x reauthentication

4. Example:

The following example specifies to enable reauthentication on the interface fe1 (port 1):

switch_a(config)#interface fe1

switch_a(config-if)#dot1x reauthentication switch_a(config-if)#