Chapter 6: Command Line Console Management
2. Usage:
Use flowcontrol on command to enable flow control, and configure the flow con- trol mode for the port.
Use the no flowcontrol to disable this function.
3.Command Syntax: flowcontrol on
no flowcontrol
4.Example:
The following example shows the use of flowcontrol on to the interface fe1 (port 1):
switch_a(config)#interface fe1
Port Status
1. Command Mode: Exec mode or Privileged Exec mode
Logon to Exec Mode (View Mode) or Privileged Exec Mode (Enable Mode). The switch_a> or switch_a# prompt will show on the screen. switch_a>
2. Usage:
Use the show interface command to display interface configuration and status.
3.Command Syntax:
show interface IFNAME
IFNAME specifies the name of the interface for which status and configuration information is desired.
4. Example:
The following example shows the use of show interface to display interface con- figuration and status of the interface fe1 (port 1):
switch_a>show interface fe1
LB308A |
| Page 129 |
|
|
