Black Box 8-port 10/100base-tx hardened ethernet extender switch Command Syntax no shutdown

Chapter 6: Command Line Console Management

4. Example:

The following example specifies to exit from the Exec mode or Privileged Exec mode.

switch_a>logout switch_a login:

6.3 Port

Configuration, Port Status, Rate Control, RMON Statistics, Per Port Vlan Activities, Port Security

Configuration

Admin Setting:

1. Command Mode: Interface mode

Logon to Configure Mode (Configure Terminal Mode).

Then logon to Interface mode.

fe1 means port 1.

The switch_a(config-if)# prompt will show on the screen. switch_a(config)#interface fe1

switch_a(config-if)#

2. Usage:

Use the shutdown command to shut down the selected interface. Use the no shutdown to disable this function.

3.Command Syntax: (no) shutdown

4.Example:

The following example shows the use of the shutdown command to shut down the interface fe1 (port 1):

switch_a(config)#interface fe1 switch_a(config-if)#shutdown switch_a(config-if)#

LB308A 724-746-5500 blackbox.com Page 127