Black Box LB308A user manual Command Line Console Management

Chapter 6: Command Line Console Management

Asymmetric Mode Fixed Rate:

1. Command Mode: Interface mode

Logon to Configure Mode (Configure Terminal Mode).

Then logon to Interface mode.

vdsl1 means Ethernet Extender port 1.

The switch_a(config-if)# prompt will show on the screen.

switch_a(config)#interface vdsl1

switch_a(config-if)#

2. Usage:

Use this command to set fixed rate bandwidth settings in the asymmetric mode for Ethernet Extender port. Use the no parameter with this command to disable fixed rate bandwidth settings for Ethernet Extender port.

3.Command Syntax: vdsl asym-fixedrate RATE no vdsl fixedrate

Table 6-1. VDSL rates.

Rate

1Set fixed rate to 1 Mbps/1 Mbps

14Set fixed rate to 14 Mbps/1 Mbps

22Set fixed rate to 22 Mbps/1 Mbps

25Set fixed rate to 25 Mbps/2 Mbps

28Set fixed rate to 28 Mbps/5 Mbps

35Set fixed rate to 35 Mbps/6 Mbps

42Set fixed rate to 42 Mbps/8 Mbps

47Set fixed rate to 47 Mbps/14 Mbps

52Set fixed rate to 52 Mbps/24 Mbps

59Set fixed rate to 59 Mbps/31 Mbps

4. Example:

The following example specifies to set fixed rate bandwidth settings (59) in the asymmetric mode for Ethernet Extender port 1 (vdsl1):

Page 184 724-746-5500 blackbox.com LB308A