Command
Enters or exits Valet® Mode. To enter Valet® Mode, press Command
on the touch-tone system. The status LED lights solid and the security system is disabled. The doors can still be locked or unlocked (if connected) using the remote, but the security system cannot be armed or disarmed. This command will also disable the security system and activate Valet® Mode if the system is already
armed. Entering Command 
again will exit Valet® Mode.
Command 
Activates Channel Two of your DEI security system, which is assigned to one of the system’s user-programmable functions. Channel Two controls _______________________________.
Command
Activates Channel Three of your DEI security system, which is assigned to one of the system’s user-programmable functions. Channel Three controls __________________________________.
Command 
Activates Channel Four of your DEI security system, which is assigned to one of the system’s user-programmable functions. Channel Four controls _______________________________.
Command 
Activates Channel Five of your DEI security system, which is assigned to one of the system’s user-programmable functions. Channel Five controls _______________________________.
14 | © 2001 Directed Electronics, Inc. |
