Black Box 8-port 10/100base-tx hardened ethernet extender switch Command Line Console Management

Chapter 6: Command Line Console Management

4. Example:

The following example specifies to upgrade VDSL speed for Ethernet Extender port 1 (vdsl1):

switch_a(config)#interface vdsl1

switch_a(config-if)#vdsl retrain

switch_a(config-if)#

VDSL Settings:

Enable/Disable Asymmetric Mode:

1. Command Mode: Interface mode

Logon to Configure Mode (Configure Terminal Mode).

Then logon to Interface mode.

vdsl1 means Ethernet Extender port 1.

The switch_a(config-if)# prompt will show on the screen.

switch_a(config)#interface vdsl1

switch_a(config-if)#

2. Usage:

Use this command to enable the asymmetric mode for Ethernet Extender port. Use the no parameter with this command to disable the asymmetric mode for Ethernet Extender port.

3. Command Syntax:

(no) vdsl asymmetric-mode

4. Example:

The following example specifies to enable the asymmetric mode for Ethernet Extender port 1 (vdsl1):

switch_a(config)#interface vdsl1

switch_a(config-if)#vdsl asymmetric-mode

switch_a(config-if)#

LB308A 724-746-5500 blackbox.com Page 183