Black Box LB308A user manual Command Line Console Management

Chapter 6: Command Line Console Management

3. Command Syntax: snmp-server location LOCATION no snmp-server location LOCATION The location for SNMP.

4. Example:

The following example specifies location (location) for SNMP: switch_a(config)#snmp-server location location switch_a(config)#

Contact:

1. Command Mode: Configure mode

Logon to Configure Mode (Configure Terminal Mode). The switch_a(config)# prompt will show on the screen. switch_a(config)#

2. Usage:

Use snmp-server contact command to specify and no snmp-server contact command to remove contact for SNMP.

3. Command Syntax: snmp-server contact CONTACT no snmp-server contact CONTACT The contact for SNMP.

4. Example:

The following example specifies contact (contact) for SNMP: switch_a(config)#snmp-server contact contact switch_a(config)#

Trap Community Name:

1. Command Mode: Configure mode

Logon to Configure Mode (Configure Terminal Mode). The switch_a(config)#

Page 170 724-746-5500 blackbox.com LB308A