Chapter 5: Web-Based Browser Management
Figure 5-52. Radius Server Setting screen.
Add Radius:
1.Add Radius: Click on the “Add Radius” button. The “Radius Server Setting” window appears.
2.Radius Server IP: Click in the “Radius Server IP” text box and specify the IP address of the remote radius server host.
3.Radius Server Port: Click in the “Radius Server Port” text box and specify the UDP destination port for authentication requests. The host is not used for authentication if set to 0.
4.Secret Key: Click in the “Secret Key” text box and specify the authentication and encryption key for all radius communications between the Hardened Ethernet Extender Switch and radius server. This key must match the encryption used on the radius daemon. All leading spaces are ignored, but spaces within and at the end of the key are used. If spaces are used in the key, do not enclose the key in quotaion marks unless the quotation marks themselves are part of the key.
Page 88 |
| LB308A |
|
|
