Chapter 6: Command Line Console Management
Logon to Privileged Exec Mode (Enable Mode). The switch_a# prompt will show on the screen. switch_a#
2. Usage:
Use install image command to load configuration file from tftp server to Hardened Ethernet Extender Switch.
3. Command Syntax:
install image
WORD specifies the file name to be loaded to Hardened Ethernet Extender Switch.
4. Example:
The following example specifies upgrading firmware (file name: flash.tgz) from
tftp server (IP address: 192.168.1.100) to Hardened Ethernet Extender Switch: switch_a#install image 192.168.1.100 flash.tgz
switch_a#
Load config to TFTP server:
1.Command Mode: Privileged Exec mode Logon to Privileged Exec Mode (Enable Mode). The switch_a# prompt will show on the screen. switch_a#
2.Usage:
Use write
3. Command Syntax:
write
4. Example:
The following example backups configuration file to tftp server (IP address: 192.168.1.100):
Page 120 |
| LB308A |
|
|
