Black Box 8-port 10/100base-tx hardened ethernet extender switch Command Line Console Management

Chapter 6: Command Line Console Management

radius-server timeout SEC

no radius-server timeout

SEC <1-1000> The number of seconds for a Hardened Ethernet Extender Switch to wait for a server host to reply before timing out. Enter a value in the range 1 to 1000.

4. Example:

The following example specifies 20 seconds for the Hardened Ethernet Extender Switch to wait for a server host to reply before timing out:

switch_a(config)#radius-server timeout 20

switch_a(config)#

Retransmit:

1. Command Mode: Configure mode

Logon to Configure Mode (Configure Terminal Mode). The switch_a(config)# prompt will show on the screen.

switch_a(config)#

2. Usage:

Use this command to specify the number of times the Hardened Ethernet Extender Switch transmits each radius request to the server before giving up.

3. Command Syntax:

radius-server retransmit RETRIES

no radius-server retransmit

RETRIES <1-100> Specifies the retransmit value. Enter a value in the range 1 to 100.

4. Example:

The following example specifies the retransmit value 12:

switch_a(config)#radius-server retransmit 12

switch_a(config)#

LB308A 724-746-5500 blackbox.com Page 179