Teledyne 100AH Entering Commands in Terminal Mode, RS-232 Terminal Mode Editing Keys

Teledyne API Model 100AH SO2 Analyzer Instruction Manual, 02417, Rev. D

7.1.4 Entering Commands in Terminal Mode

In terminal mode, all commands must be terminated by a carriage return; commands are not processed until a carriage return is entered. While entering a command you may use the following editing keys:

Table 7-3: RS-232 Terminal Mode Editing Keys

Key	Function
CR (carriage return)	Execute command
BS (backspace)	Backspace one character to the left
ESC (escape)	Erase entire line
Control-R (ASCII 18 decimal)	Recall previous command
Control-E (ASCII 5 decimal)	Recall and execute previous command

Commands are not case-sensitive; you should separate all command elements (i.e. keywords, data values, etc.) by spaces.

Words such as T, SET, LIST, etc. are called keywords and are shown on the help screen in uppercase, but they are not case-sensitive. You must type the entire keyword; abbreviations are not accepted.

OBTAINING HELP

Typing “?” followed by Return or Enter will cause a

help screen to be displayed.

7-4