Teledyne 100AH SPECIFICATIONS, Agency APPROVALS, Warranty, Specifications, Ppm Rms

Teledyne API Model 100AH SO2 Analyzer Instruction Manual, 02417, Rev. D

3SPECIFICATIONS, AGENCY APPROVALS, WARRANTY

3.1 Specifications

Ranges	In 1 PPM increments from 10 PPM to 5000 PPM, dual ranges or autoranging
Noise at Zero	0.05 PPM RMS
Noise at Span	<0.5% of reading (above 50 PPM)
Lower Detectable Limit1	0.1 PPM RMS
Zero Drift2	< 1 PPM/24 hours
Zero Drift2	<2 PPM/7 days
Span Drift2	<0.5% FS/7 days
Lag Time	5 sec
Rise Time	95% in < 30 sec
Fall Time	95% in < 30 sec
Sample Flow Rate	650cc/min. ±10%
Linearity	1% of full scale
Precision	0.5% of reading
Temperature Range	5 - 40oC
Temp Coefficient	< 0.1% per oC
Humidity	0 - 95% RH, non-condensing
Voltage Coefficient	< 0.05% per V
Dimensions HxWxD	7"x17"x23.6" (18 cm x 43 cm x 61 cm)
Weight, Analyzer	43 lbs (19.5 kg)
Weight, Pump Pack	16 lbs (7 kg)
Power, Analyzer	110 v∼60 Hz, 220 v∼50 Hz, 240 v∼50 Hz, 250 watts
Power, Analyzer3	230 v∼50 Hz, 2.5A
Power, Ext. Pump	110 v∼60 Hz, 220 v∼50 Hz, 240 v∼50 Hz, 295 watts
Power, Ext. Pump3	230 v∼50 Hz, 2.5 A
Environmental	Installation Category (Overvoltage Category) II
Conditions	Pollution Degree 2
Recorder Output4	4 - 20 mA non-isolated standard, 0-100 mV, 0-1, 5, 10 v ; resolution of 1 part
	in 1024 of selected voltage or current range. 4 - 20 mA isolated optional.
Status Option	12 Status Outputs from opto-isolator
Measurement Units	PPM, mg/m3

1.Defined as twice the zero noise level.

2.At constant temperature and voltage.

3.Electrical ratings for CE Mark compliance.

4.Bi-polar. (voltage or current selectable by the jumper on the motherboard)

3-1