Teledyne 100AH Test Commands and Messages, RS-232 Test Messages, Name Message Description

Teledyne API Model 100AH SO2 Analyzer Instruction Manual, 02417, Rev. D

7.3 TEST Commands and Messages

Table 7-7: RS-232 Test Messages

Name	Message	Description
RANGE1	RANGE=xxxxx PPM2	Analyzer range
STABILITY	STABIL=xxxx.x PPM	Std. Deviation of last 25 SO2
		concentration values
VACUUM	PRES=xxx.x IN-HG-A	Reaction cell pressure
SAMPPRESS	PRES=xxx.x IN-HG-A	Sample pressure
SAMPFLOW	SAMPLE FL=xxx	Sample flow rate
	CC/M
PMTDET	PMT=xxxxxx MV	PMT output
UVDET	UV LAMP=xxxx MV	Instantaneous UV lamp reading
LAMPRATIO	LAMP RATIO=xx.x%	Ratio of UV lamp reading to calibrated
		UV lamp reading
STRAYLIGHT	STR LGT=xxx.x PPM	Stray light level
DARKPMT	DRK PMT=xx.x MV	PMT dark current in MV
DARKLAMP	DRK LMP=xx.x MV	UV detector dark current in MV
SLOPE	SLOPE=x.xxx	Calibration slope parameter
OFFSET	OFFSET=xxx.x MV	Calibration offset parameter
HVPS	HVPS=xxxxx V	High voltage power supply
DCPS	DCPS=xxxxxx MV	DC power supply
RCELLTEMP	RCELL TEMP=xxx C	Reaction cell temperature
BOXTEMP	BOX TEMP=xxx C	Internal box temperature
PMTTEMP	PMT TEMP=xxx C	PMT temperature
SO2	SO2=xxxx.x	SO2 concentration
TESTCHAN3	TEST=xxxx.x MV	Test channel output
CLOCKTIME	TIME=HH:MM:SS	Time of day

1Displayed when single or autorange is enabled.

2Depends on which units are currently selected.

3Only if test channel is selected.

7-8