Black Box LB308A user manual Command Line Console Management

Chapter 6: Command Line Console Management

Logon to Configure Mode (Configure Terminal Mode). Then logon to Interface mode.

fe1 means port 1.

The switch_a(config-if)# prompt will show on the screen. switch_a(config)#interface fe1

switch_a(config-if)#

2. Usage:

Use this command to assign a Multiple Spanning Tree instance to a port. Use the no parameter with this command to remove the instance.

3. Command Syntax:

bridge GROUP instance INSTANCE_ID no bridge GROUP instance INSTANCE_ID GROUP <1-1> Specify the bridge-group ID. INSTANCE_ID Specify the instance ID.

4. Example:

The following example assigns a Multiple Spanning Tree instance (3) to a port (fe1) in bridge GROUP (1):

switch_a(config)#interface fe1

switch_a(config-if)#bridge-group 1 instance 3 switch_a(config-if)#

Bridge-Group Instance Priority:

1. Command Mode: Interface mode

Logon to Configure Mode (Configure Terminal Mode).

Then logon to Interface mode.

fe1 means port 1.

The switch_a(config-if)# prompt will show on the screen. switch_a(config)#interface fe1

switch_a(config-if)#

Page 154 724-746-5500 blackbox.com LB308A