Example
ODE> diskexpt2
Type HELP for command information.
***************************************************************************
****** |
| ****** |
****** | DISKEXPT2 | ****** |
****** |
| ****** |
****** | Copyright (C) | ****** |
****** | All Rights Reserved | ****** |
****** |
| ****** |
****** | This program may only be used by HP support personnel and | ****** |
****** | those customers with the appropriate Class license or | ****** |
****** | Node license for systems specified by the license. HP | ****** |
****** | shall not be liable for any damages resulting from misuse | ****** |
****** | or unauthorized use of this program. This program | ****** |
****** | remains the property of HP. | ****** |
****** |
| ****** |
****** | Version B.00.27 | ****** |
****** |
| ****** |
***************************************************************************
Enter password or a <cr> to exit:
The bus is being scanned for devices. Please wait. |
| ||||
More than 3 Modules/Busses were found on this system. |
| ||||
Since mapping all the Busses will take time, you can |
| ||||
choose a range of busses to map or press <return> to |
| ||||
map all the busses. For example, to map bus 2, 4, 5, |
| ||||
and 6, type the range 2,4/6 |
|
|
| ||
Indx Path | Module | Bus | HPA | SPA | |
0 | 0/1/1/0 | PCI SCSI | SCSI | 200800 | 0 |
1 | 0/1/1/1 | PCI SCSI | SCSI | 200900 | 0 |
2 | 0/2/1/0 | PCI RAID160 SCSI | 400800 | 0 | |
3 | 0/4/1/0/4/0 | PCI FCQL | Fibre | 812000 | 0 |
Enter a range (? for help, q for quit)<default is map all>:
The bus is being scanned for devices. Please wait. |
|
|
|
| |||
Sel/ |
|
|
|
|
|
|
|
Indx Path | Product String |
| Rev | Bus | Size | ||
0 | 0/1/1/0.1.0 | HP 36.4G | ST336753LC | HPC3 | SCSI | 36.4 | GB |
1 | 0/1/1/1.0.0 | HP 36.4G | ST336753LC | HPC3 | SCSI | 36.4 | GB |
Legend:
Sel/Indx - Indx of the disk listed. This is flagged with a '*' if it is marked for testing.
NOTE:
The size of disk may not match the Information Specified by the vendor due to difference in calculation methods.
DISKEXPT2> help
DISKEXPT2 Help
Quick Start on Utility.
UTILINFO A brief procedure on how to use the utility.
Environment variables:
SHOWENV | Displays the current settings | for TESTDISK, BLOCK and RANGE. | |
BLOCK | Selects the block to be tested. | ||
RANGE | Selects | range of blocks to be | tested by the ROMT and WRTMT commands. |
TESTDISK | Selects | the disk to be tested. |
|
Read & Writing Disk Blocks:
SHOWBUF | Displays the internal | buffer contents | after the last read command. | |
READBLK | Reads the given block | from the | given SCSI disk. | |
READFULL | Reads the given block | with the | header | from the given SCSI disk. |
WRITEBLK | Writes the given block on to the given disk. | |||
WRITEFULL | Writes the given block with the header on to the given disk. |
Media Tests:
ROMT | Performs a read media test on the selected range of blocks. |
WRTMT | Performs a write/read/verify test on the selected range of blocks. |
Continue ([y]/n)? y |
Disk Log Access:
ACCESSLOG Displays the disk logs in a consise format.
READLOG | Reads the log data from the disk. |
CLRLOG | Clears the log data from the disk. |
Running ODE Tools on HP 9000 Systems 33