Testing the LDB/STB instructions
Testing the STW/LDCWS instructions
Testing the STD/LDD instructions
SECTION 146
Functional test of FIC instruction
<<<MASTER = 1 SLAVE = 0>>>
STARTING MULTIPLE PROCESSOR TESTS - SECTIONS 140/149
SECTION 140
Set up for LDW/STW (line test) test
Testing the LDW/STW instructions (line test) - syncronously
Checking ownership of blocks, and LDW/STW times
Set up for LDW/STW (word test) test
Testing the LDW/STW instructions (word test)
Checking ownership of blocks, and LDW/STW times
SECTION 141
Functional test of PDTLB instruction
SECTION 142
Functional test of PITLB instruction
SECTION 143
PDTLB head on interface test
SECTION 144
PITLB head on interface test
SECTION 145
LOAD/STORE instructions test (virtual mode)
Set up for virtual mode LDW/STW test
Testing the LDW/STW instructions
Testing the LDWM/STWM instructions
Testing the LDWX/STW instructions
Testing the LDH/STH instructions
Testing the LDB/STB instructions
Testing the STW/LDCWS instructions
Testing the STD/LDD instructions
SECTION 146
Functional test of FIC instruction
RUN COMPLETED.
Wait 7 seconds for processors to return to ready state.
Using the diskexpt2 Command
The following example shows the output from the diskexpt2 command. Note the restrictions on using this command and the required use of a password.
32 Performing Common ODE Tasks