AT&T R1V2 manual 19System Administration Menu=4, Hhmm, Mmddyy, Command

TABLE 16-19System Administration (Menu=4) (continued)

ACTION	DESCRIPTION	DATA
41	Specify the number of rings before calls	[0-31; 2]
	are sent to call coverage or call following
	calls return to their home station	[HHMM]
50	Set time of day
51	Set the date	[MMDDYY]
52	Allow SMDR records to be sent to the	[1=Y / 0=N]
	SMDR port	[10-255; 40]
53	Start billing calls how many seconds after
	the last digit is dialed	[1-9999; 820]
60	Specify the modem request code
61	Does the receiver respond to remote loop	[1=Y / 0=N]
62	Disconnect on loss of carrier	[1=Y / 0=N]
63	Are pins CF and CB common	[1=Y / 0=N]
64	Disconnect on received space	[1=Y / 0=N]
65	Should the system send a space character	[1=Y / 0=N]
70	on disconnect	[1=Y / 0=N]
	Should maintenance busy of GS trunks be
	blocked?	[1-9999]
71	Assign the CO trunk pool access code
72	Set the number of DID digits used to	[2-4; 0 for none; 3]
73	match against station PDCs	[0-15; 15]
	Assign the number of account code digits
74	Display/change expert mode prompt (less	[“Command: “]
75	than 9 printable characters)	[”8 characters or less”]
	Change administration password (less
	than 8 printable characters, no spaces
81	allowed, display always shows “????????” )	[1=Y / 0=N]
	Switched Loop Attendant system: Audible
	tone at expiration of hold timer?

Continued on next page

Command Reference 16-23