AT&T R1V2 PORTS, Station/Trunk/Special Port Circuit Board Options, See -17,Applicable Options

TABLE 16-16 Port Options

PORTS, Station/Trunk/Special Port Circuit Board Options

FOR QUALIFIED SYSTEMS TECHNICIANS ONLY*

(See Table 16-17,“Applicable Options”)

ACTION	DESCRIPTION	DATA
32	Set CO disconnect time (in 20 msec increments)	[0-2540 msec; 500]
33	Set end-to-end signaling tone timing	[0-2540 msec; 60]
	(in 20 msec increments)	[0-2540 msec; 60]
34	Set end-to-end signaling pause timing
	(in 20 msec increments)	[1 / 0]
35	Set hybrid balance. Data is balance type: 1=Resistor;
	0=Resistor/Capacitor. Trunk ports default to 0;
	station ports default to 1.	[1 / 0]
36	Set gain; 1 (Gain=3dB) or 0 (Gain=0dB)
37	Set E&M signaling type. Data is signaling type 0	[0 - 2]
	(Type 1 compatible), 1 (Type V), or 2 (Type I).	[0-5100 msec; 300]
38	Set answer supervision delay timing

* WARNING:	The default values in Tables 16-16 and 16-17must not be changed without
	the support and guidance of Tier III staff.

Command Reference 16-19