AT&T R1V2 manual Home Area Code Exception List, Area Code Routing Table

Area Code Routing Table

All North American area codes are assigned to routing pattern 1 by default, except area codes N00 and N10, which default to 0.

To assign a different routing pattern to an area code [AG]

1 At Action = , enter 3 0 0 .

2 At Data = , enter the area code.

3 You see the prompt, Action = 301.

4 At Data = , enter a routing pattern (1-8), or 0 for no pattern (CO routing). The default is 1.

Note The Home Area Code routing pattern is assigned by first administering the Action=30/Data=[Area Code] under Main Menu item 4 (System) and then administering the Action=300 Data=[Home Area Code] and Action=301 Data=[Pattern Number] items.

Home Area Code Exception List

Note There can be as many as four exception lists. The maximum number of entries for all lists combined is 800. You can have up to eight seven-digit telephone numbers in these Home Area Code (HAC) Exception Lists.

Enter Home Area Code	1 At Action = , enter	5 0 0 .
Exception List Number	2 At Data = , enter a	list number (1-4).

Enter ARS Routing	1 At Action = , enter	501. ‡
Pattern associated with	2 At Data = , enter a	pattern	number (1-8).
this HAC exception list.

† Action = 500 must be entered first.

12-6Administering Automatic Route Selection (ARS)