AT&T R1V2 manual Paging Associated with Auxiliary Trunk Port

Paging (Associated with Auxiliary Trunk Port)

You can assign Paging to up to three zones. Each paging zone must be assigned to a separate port. Follow the procedure below to assign an access code and dial restriction to each zone. If, in addition, you want to assign one access code to all zones, follow the procedure below entitled “To assign an All-Zone access code.”

To assign a paging zone access code [AG]

1 Type t and at Port = , enter the port number for the paging zone you’re administering

2 At Action = , enter 1.

3 At Data = , enter

■1301 for Zone 1

■1302 for Zone 2

■1303 for Zone 3

4	You see the prompt		Action	= 2.
5 At Data = , enter		an	access	code (PDC) for this zone, or
	0 for none.
6	Type a and at Action = , enter 1 to dial restrict the
	zone, or 0 not	to.

To assign an All-Zone	1 At Action = , enter	3.
access code (if more than	2 At Data = , enter a	PDC for All-Zone access, or 0 for

one zone)

none.

Note The system automatically copies this value to all paging zones.

6-2Administering Auxiliary Equipment