AT&T R1V2 manual 2Initialization Sequence, Each station’s port assignment on the individual voice

TABLE 3-2Initialization Sequence (continued)

8 Voice and Data Station Records	Assign all station ports (except for attendant consoles),
form	following the procedures in Administering Voice Stations
	and Administering Data Line and STARLAN CP Ports. Do
	not enter class-of-service parameters yet. There are some
	procedures you cannot complete until all stations are
	assigned, such as button assignments. Be sure to record
	each station’s port assignment on the individual voice
	terminal or data terminal forms as you assign them.
9 Attendant Options and	Assign ports and enter class-of-service, attendant features,
Attendant Console forms	and button feature assignments for the attendant
	console(s) following the procedures in Administering
	Attendant Equipment and Administering Button Assignments.
10 Terminal forms	Enter class-of-service information for all voice and data
	stations (and button assignments for multiline voice
	terminals) following the procedures in Administering Voice
	Stations, Administering Data Line and STARLAN CP Ports,
	and Administering Button Assignments.
11 Direct Group Calling List	Enter DGC groups following the procedure in
	Administering Direct Group Calling (DGC) Groups.
12 Automatic Route Selection	Enter ARS options and patterns following the procedure
Forms	in Administering Automatic Route Selection (ARS).
13 Tape Save/Restore	Save the system translations and verify their accuracy
	following the procedures in Administering Tape Save/Restore
	Operations.

When you have completed these steps, the system is initialized. Be sure to test that the system is properly initialized following the procedures in the System 25 Installation and Test Manual.

Initializing the System 3-5