Moving a Voice Station

Use this procedure when you want to move a station – its features, button assignments, and PDC — to another port. Keep these considerations in mind when you move a station:

The moved-to port must be vacant.

The terminal types must be the same; that is, you can only move a station to the same physical type (e.g., multiline voice terminal to multiline voice terminal port).

To move a station to a new port

1 From the Main Menu prompt, enter 2.

2 At PDC = , enter the PDC of the station you want to move.

3 At Action = , enter 0.

The system displays the station’s present port assignment at Data = CSSPP

4 Type d, and at Data = , enter the new port assignment (CSSPP).

Assigning Class of Service Options

This section describes the class of service options– the calling restrictions and features– you can administer for:

Single-line voice terminals

Multiline voice terminals, including attendant consoles

Single-Line Voice Stations

To assign class of service

to a single-line voice

terminal

1From the Main Menu prompt, enter 2.

2At PDC = , enter the PDC of the station to which you want to assign class of service.

Calling Restrictions

 

 

 

To restrict dial access to

1

At

Action = , enter 3.

the Central Office trunk

2

At

Data = , enter 1 for yes or 0 for no. The default is 0 .

 

pool

7-4Administering Voice Stations

Page 51
Image 51
AT&T R1V2 manual Moving a Voice Station, Assigning Class of Service Options, Calling Restrictions