AT&T R1V2 manual Sys Acc-O, Pers Line AG

Assigning Buttons to Multiline Terminals and Attendant Consoles

To assign a feature to a button on a multiline voice terminal or attendant console, begin with this step

1 From the Main menu prompt, enter 2.

2 At PDC = , enter the PDC of the voice terminal or attendant console.

3 At Action = , enter 1 0 0 .

4 At Data = , enter the button number (from the preceding tables) you’re assigning the feature to.

To complete a button assignment, find the feature you want to assign from the list below. Enter the button function number after Action = 101. Any additional required actions are described with that feature. Repeat this procedure, beginning with Action = 100, for each button you want to assign to the voice terminal.

To assign System Access	1	At Action	=	, enter	1 0 1 .
(Originate only)	2	At Data =	,	enter	1. †

(SYS ACC-O)

To assign Direct Facility	1 At Action =		, enter 101 .
Access (FACILITY) [AG]	2	At Data = ,	enter	2.
	3 You see the		prompt,		Action	= 102.
	4 At Data = , enter			the	facility	access code.

To assign a personal line	1 At Action = , enter		101 .
(PERS LINE) [AG]	2	At Data = , enter	3. †
	3	You see the prompt, Action = 102.
	4	At Data = , enter the trunk number.

(continued)

† This feature cannot be administered on a SLAC.

10-6Administering Button Assignments