AT&T R1V2 manual Administering Trunks, Assigning a Trunk

Administering Trunks

This section shows you how to:

■Assign and remove trunks

■Assign class-of-service parameters for various types of trunks

Assigning a Trunk

To assign a trunk [AG]	From the Main menu prompt, enter 1, then follow the
	procedures below to define the trunk type and assign a trunk
	number.
	Define the trunk type:
	1 From the Main menu prompt, enter 1.
	2 At Port = , enter the	carrier/slot/port (CSSPP) to which
	you want to assign the trunk.
	3 At Action = , enter	1.
	4 At Data = , enter the	trunk type number. Select the
	number from the next table.

Administering Trunks 5-1