AT&T R1V2 manual Class-of-Service Options, Pooled Facility Access, Dial Access

Class-of-Service Options

Follow the procedures below to assign class-of-service options to this trunk.

Pooled Facility Access

Group: Is this trunk in a pooled facility access group?

1 At Action = , enter 4.

2 At Data = , if the trunk is in a pooled facility access group, enter the facility access code (FAC). Enter 0 if the trunk is not in any group. The defaults are as follows:

■100 for Loop Start trunks

■101 for Ground Start trunks

■102 for Tie trunks

Dial Access	1 At Action = , enter	5.
	2 At Data = , enter 1 if	you want	to allow dial access, enter
	0 if you do not. The default is		1@.

DGC Group: To assign this trunk to a DGC group

Note This item is not administerable for trunk types 1003-

1008.

1 At Action = , enter 6.

2 At Data = , enter the DGC group number (l-32, or 0 for none). The default is 0.

Night Service: To choose either Directed or Trunk- Answer-from-Any-Station (TAAS) Night Service for this trunk

To receive either form of night service, this trunk’s class of service must include night service (that is, for Action=3, Data must be between 8 and 15). Also, a NIGHT button must be assigned to the attendant console.

■For Directed Night Service, at least one station must be assigned to receive night service calls from this trunk (see Administering Voice Stations).

■For TAAS Night Service, an external alert must be assigned for night service use.

(continued)

@ Strongly recommended this value be used

Administering Trunks 5-5