AT&T R1V2 manual At Action = , enter 77. ‡

To allow the user to	1 At	Action = , enter 71. ‡
configure data port	2 At	Data = , enter 1 for yes or 0 for no. The default is
parameters
	1. For a STARLAN CP, the default is 0.

To permit mismatch of	1 At Action	= , enter 72.	‡
baud rate between this	2 At Data =	, enter 1 for	yes or 0 for no. The default is 0 .
port and a called port

To echo dialed characters	1	At Action = , enter 73.	‡
during call setup	2	At Data = , enter 1 for	yes or 0 for no. The default is 1.

To set your disconnect	1 At	Action	=	, enter 74. ‡
code	2 At	Data =	,	enter:

1 for two short BREAKS

0 for one long BREAK.

The default is 1.

To display call progress	1 At Action	= , enter 75.	‡
text messages	2 At Data =	, enter 1 for	yes or 0 for no. The default is 1.

To display connection	1 At Action = , enter 77. ‡
indication message	2 At Data = , enter 1 for yes or 0 for no. The default is 1 .

‡ This is a Read-Only feature for the STARLAN CP.

Administering Data Line and STARLAN CP Ports 8-9