AT&T R1V2 manual Assign Other Data Features

Can this terminal operate	1 At	Action = , enter 66.	‡
at a baud rate of 4800	2 At	Data = , enter 1 for	yes or 0 for no. The default is 0 .
bps?

Can this terminal operate	1 At	Action = , enter 67.	‡
at a baud rate of 9600	2 At	Data = , enter 1 for	yes or 0 for no. The default is 0 .
bps?

Can this terminal operate	1	At	Action = , enter 68.	‡
at a baud rate of 19200	2	At	Data = , enter 1 for	yes or 0 for no. The default is 1 .

bps?

To assign the parity setting to correspond to the terminal’s parity setting

Note This setting only specifies the parity the data port will use when sending text messages to the terminal. All data is transmitted eight bits per character.

1 At Action = , enter 69. ‡

2 At Data = , enter a number that represents one of the following parity settings (the default is 2):

0 = zero in the parity bit

1 = one in the parity bit

2 = even parity (may be used for none)

3 = odd parity

Assign Other Data Features

To enable keyboard

dialing (also referred to as

Command Mode)

1 At Action = , enter 70. ‡

2 At Data = , enter 1 for yes or 0 for no. The default is

1.Generally, set this to 1 for data terminals and 0 for hosts.

‡ This is a Read-Only feature for the STARLAN CP.

8-8Administering Data Line and STARLAN CP Ports