AT&T R1V2 Restore the System Translations from a Backup Tape, Calls in progress will be dropped

5 Rewind the tape.

6 Label the tape with the date and time. Store the tape in a safe place.

If the verification is unsuccessful, the SAT displays:

VERIFY FAILED

To troubleshoot	1	Rewind the tape and repeat the verification procedure.
	2 If this verification is successful, follow steps 5 and 6 above.
	3	If the verification fails a second time, save a new tape
		following the above procedures, and contact your AT&T
		service representative.

Restore the System Translations from a Backup Tape

Note This procedure will interrupt your phone service for about five minutes. Any

calls in progress will be dropped!

To begin

To Restore

1 Insert cassette and rewind the tape (as required).

2 Press the PLAY button on the tape unit. (The tape unit does not begin to operate yet.)

1 From the Main Menu prompt, enter 9 to select Save/Restore.

2 At Action = , enter 3. You see:

Save/Restore: Action = 3 Data =

3 Type d and at Data = , enter 1. You see the message:

W26: YOU ARE ABOUT TO START A TAPE RESTORE c for continue, any other key to abort

(continued)

13-4Administering Tape Save/Restore Operations