AT&T R1V2 manual Changing a Station Dial Code

4At Data = , enter 0 .

If this station is associated with another station(s) for features such as Call Coverage, Automatic Intercom, etc., you will see a warning message for each type of association. To go on with the action, respond to the system message, c for continue, any other key for abort.

When there are no more associations with the station you want to remove, you see:

NO MORE BLOCKS

c for continue, any other key for abort

5Enter c.

You see the following display when the station is removed:

Action = 1 Data = 0

Note If you remove a station that is associated with other stations, you may need to reassign features on those other stations as well.

Changing a Station Dial Code

You can only change a dial code to one that does not conflict with any existing number. For more information, see the “Dial Plan” description in the System 25 Implementation Manual for R1V2. To determine if a dial code exists, use the Search function described later in this chapter.

There are other circumstances that might prevent you from changing a dial code. For example, the existing station number might be part of a DGC group or call pickup group. Again, use the Search function to see if the dial code is a member of any group.

To change a station dial code

1 At the Main Menu prompt, enter 2.

2 At PDC = , enter the PDC you want to change.

3 At Action = , enter 2.

4 At Data = , enter the new dial code.

If you see Error 7012, that dial code may already be assigned.

Administering Voice Stations 7-3