Castelle UF-490 appendix Loading Documents, How to Load Documents, Correct, Incorrect

Loading Documents

How to Load Documents

1.Be sure the document(s) is free of staples, paper clips and is not torn, greasy or covered by foreign objects.

2.Place the document(s) FACE DOWN on the Automatic Document Feeder (ADF) until the leading edge placed into the machine stops.

If you are sending multiple pages, make sure that the bottom sheet enters first. You can also stack up to 20 SHEETS on the ADF at one time. If you have more than 20 sheets, wait until transmission or storing in memory starts as pages feed through, place any remaining pages on top of the last page in the feeder.

3.Adjust the Document Guides to center the document on the ADF.

Document Guides

CORRECT INCORRECT

When you set a document on the ADF, the display message will change from date and time (standby) to the following message. You can now change basic transmission settings, or begin the dialling procedure.

DOCUMENT SET

NOTE

1 Transmitting documents longer than 356 mm requires user’s assistance.

38