Castelle UF-490 appendix Customizing Your Machine, Fax Parameter Table, Setting, Comments, Number

Customizing Your Machine

Fax Parameter Table

No.	Parameter	Setting	Setting	Comments
		Number
19	OGM LENGTH	1	1 sec.	Setting for the OGM length of your TAM from 1 to 60
	(TAM I/F)			seconds. The machine will not start to detect SILENCE
		---	---
				until the time setting has lapsed.
		60	60 sec.	(Default = 20 sec.)
20	SILENT DETECTION	1	Invalid	Selecting the Silent Detection Mode.
	(TAM I/F)
		2	Valid
22	SUBSTITUTE RCV	1	Invalid	Selecting whether the machine receives to memory when
				the recording paper runs out, toner runs out or the
		2	Valid
				recording paper is jammed.
23	RECORDING PAPER	1	A4	Setting the recording paper size installed in your machine.
	SIZE
		2	Letter
		3	Legal
24	PRINT REDUCTION	1	Fixed	Selecting print reduction mode.
				Fixed: Reduce received document according to setting of
		2	Auto
				Parameter No. 25.
				Auto : Reduce received document according to the length
				of received documents.
25	REDUCTION RATIO	70	70%	Selecting the fixed print reduction ratio from 70% to 100%.
				This parameter functions only when the fixed print
		----	----
				reduction is selected on Fax Parameter No. 24.
		100	100%
26	POLLING		(----)	Setting a 4-digit password for secured polling. (See page
	PASSWORD			68)
28	STAMP AT MEM. XMT	1	Invalid	Selecting whether the machine stamps the original
				documents when storing the documents into memory.
		2	Valid
				(depending on the Stamp setting on the Control Panel)
30	DRD SERVICE	1	Invalid	Selecting whether or not the machine is available "DRD
				Service". If this parameter is set to "Valid", your machine
		2	Valid
				detects the specified ring pattern only to receive a
				document automatically.
32	COPY REDUCTION	1	Manual	Selecting whether the machine performs the copy
				reduction ratio automatically or manually.
		2	Auto
				Manual: The machine will prompt you for the Zoom ratio
				(100% to 70%) when making copies.
				Auto : The machine will automatically determine the
				reduction ratio according to the length of the
				original document.

34