Castelle UF-490 appendix Manual Number Dialling Direct Transmission

Sending Documents

Direct Transmission

If your machine’s memory is full or you wish to send the document(s) immediately, use Direct Transmission.

Manual Number Dialling (Direct Transmission)

To dial the telephone number manually, follow the steps below.

1

Set document(s) face down.

DOCUMENT SET

2

3

4

5

8 9

1

Enter a telephone number from the keypad. Ex: 5 5 5 1 2 3 4

Your machine starts dialling the telephone number.

MEMORY XMT?

DOCUMENT SET

5551234❚

Basic Operations

NOTE	1	If you need a special access number to get an outside line, dial it first then press					PAUSE	to
		enter a pause (represented by a "-") before dialling the full number.
		Ex: 9 PAUSE 5551234
	2	If you are using Pulse dialling and you wish to change to Tone dialling in the middle of dialling,
		press		(represented by a "/").
			TONE
		The dialling mode will be changed from Pulse to Tone after dialling the digit "/".
		Ex: 9 PAUSE TONE 5551234
	3	To stop the transmission, press				.
					STOP
		The display shows:
		COMM. STOP?
				and 1 to stop the transmission.
		Press	SET

47