Castelle UF-490 appendix Fax Parameter Table, Setting Comments Number, Off, Always

				Customizing Your Machine
Fax Parameter Table
No.	Parameter	Setting	Setting		Comments
		Number
01	CONTRAST	1	Normal	Setting the home position for the CONTRAST.
		2	Lighter
		3	Darker
02	RESOLUTION	1	Standard	Setting the home position for the RESOLUTION.
		2	Fine
		3	S-Fine
		4	Halftone
04	STAMP	1	Off	Setting the home position of the STAMP key.
				To select the stamp function when document is stored in
		2	On
				memory, see Fax Parameter No. 28.
05	MEMORY	1	Off	Selecting the memory transmission mode.
		2	On
06	DIALLING METHOD	1	Pulse	Selecting the dialling method.
		2	Tone
07	HEADER PRINT	1	Inside	Selecting the printing position of the header.
				Inside : Inside TX copy area.
		2	Outside
				Outside : Outside TX copy area.
		3	No print	No print : Header is not printed.
08	HEADER FORMAT	1	Logo, ID No.	Selecting the header format.
		2	From To
09	RCV’D TIME PRINT	1	Invalid	Selecting whether the machine prints the received date &
				time, remote ID, percentage of reduction and page number
		2	Valid
				on the bottom of each received document.
10	KEY/BUZZER	1	Off	Selecting the volume of the Key/Buzzer tone.
	VOLUME
		2	Soft
		3	Loud
12	COMM. JOURNAL	1	Off	Selecting the home position of printout mode for COMM.
				Journal Off/Always/Inc. only.
		2	Always
				Off	: Does not print
		3	Inc. only	Always	: Always prints
				Inc. only : Prints only when communication has failed.
13	AUTO JOURNAL	1	Invalid	Selecting whether the machine prints the journal
	PRINT			automatically after every 32 transactions.
		2	Valid
17	RECEIVE MODE	1	TEL	Setting the receive mode.
		2	FAX
		3	FAX/TEL
			SW.
		4	TAM I/F
18	OPERATOR CALL	1	20 sec.	Selecting the length of time that your machine signals
	TIMER			(rings) for an incoming voice call in Fax/Tel Auto Switching
		2	30 sec.
				Mode. (See page 59)
		3	40 sec.
		4	50 sec.

Continued on the next page...

Programming Your Machine

33