Castelle UF-490 appendix Setting the Access Code

Access Code

General Description

The Access Code prevents an unauthorized user from operating the machine. Once a 4-digit Access Code is registered, no one can operate the machine without entering the correct access code.

Automatic Receiving, however, is always available. After you complete any operation, such as mode setting or transmission, and the display returns to standby, you have to re-enter the access code in order to use the machine again. Registering the Access Code does not affect the use of the machine in any other way.

Setting the Access Code

1 7

2

4

3

	3	8
4	Enter a 4-digit Access Code.
	Ex: 1	2 3 4
5

6	Select Restriction Level.
	1 for All operations

or

2 for Setting and Printing the Fax Parameters only.

Ex: 2

7

SET MODE (1-8)

NO.=❚ (01-99)

❚ ❚ ❚ ❚

1234

ALL<>

PARAMETERS<>

Advanced Features

NOTE	1 To erase the Access Code, enter the Access Code and press				START		and follow the
				and		.
	procedure above to Step 3, then press		SET		STOP
		CLEAR

75