Castelle UF-490 appendix Receiving Documents, Reception Modes

Receiving Documents

Reception Modes

You can select one of the four modes as shown below.

Conditions	Suggested Reception Mode	Settings
You normally receive	Telephone Mode	Fax Parameter No. 17 set to 1:
only voice calls.	You can answer the incoming call via an External	Tel
	Telephone (Optional). If you receive a fax calling
	signal, simply press START to receive manually.
	(See page 58)
You receive both voice	Fax / Tel Auto Switching Mode	Fax Parameter No. 17 set to 3:
and fax calls.	Unit will answer the incoming call then distinguishes	Fax / Tel SW.
	whether it is voice or fax call. If it is a fax call, the unit will
	receive automatically. If it is a voice call, the unit will
			Operations
	signal (ring) through the speaker for your attention.
	(See page 59)
You normally receive	Fax Mode	Fax Parameter No. 17 set to 2:
fax calls only.	Unit will receive the document automatically. All	Fax
			Basic
	incoming calls (including a voice call) are
	answered by the fax machine. (See page 60)
You receive both voice	TAM Interface Mode	Fax Parameter No. 17 set to 4:
and fax calls. And a	The TAM answers the incoming call. During that	TAM I/F.
Telephone Answering
Machine (TAM) is	time, the unit also monitors whether it is a voice
connected.	call, the TAM continues to operate. If it is a fax call,
	the unit will automatically switch the line to the Fax
	and begin receiving document. (See page 61)

NOTE

1Depending on the model of the Telephone Answering Machine (TAM) that is connected, some of the features may not be compatible with your fax machine operating in the TAM Interface mode.

2If you are using the "Distinctive Ring Service" provided by your local telephone company, please note that the ring pattern for your fax number must match with the setting of Fax Parameter No. 30 (DRD SERVICE). (See page 34)

If the setting does not match with the ring pattern, your machine will not receive a document automatically and the telephone will continue to ring.

Furthermore, if your TAM does not support the "Distinctive Ring Detector" service, it may not function properly in TAM Interface.

57