Shure UHF-R manual Automatic Transmitter Sync, To perform a transmitter sync

English

Automatic Transmitter Sync

This feature automatically updates a bodypack or handheld transmitter’s group and channel settings to match those of a selected receiver.

To perform a transmitter sync...

1.Open the transmitter battery cover to display the infrared (IR) port.

2.With the IR port exposed to the receiver, select Sync > sync from the receiver LCD interface.

The display on the receiver indicates whether the sync was successful. If the sync fails, try again, making sure that the IR port on the transmitter is exposed and directly faces the IR port on the receiver.

NOTE: Close the battery door before performing a sync on other transmitters.

®	RF	Audio	ABJ 779-810 MHz	Navigate	RF	Audio	ABJ 779-810 MHz	Navigate	Control	Monitor	Power
								ENTER		1
	OL				OL					2
UR4D										push
										Monitor Clip
Wireless Receiver								EXIT
with Audio Reference
Companding									sync
sync

To transfer other transmitter settings...

Optionally, you can transfer other transmitter settings from a receiver when you perform a sync. Use the following steps:

1.Select Sync > Setup from the receiver LCD interface.

2.Turn the Control wheel to change parameter settings.

3.Push the Control wheel to move to the next parameter.

4.Push the flashing ENTER button to save the settings.

The transmitter settings you set on the receiver remain for future syncs.

NOTE: If you don’t want the sync to send a setting, set the parameter to No Change

Available Settings...

The following settings are available from the Sync > Setup menu:

•Sensitivity (Sens) bodypack only

•Gain (Gain)

•RF Power (Pwr)

•Power and Frequency Lock (Lock), which has the following values:

Power lock only: (Pwr Only)

Frequency lock only: (Freq only)

Both: (Freq and Pwr)

Neither: (Unlocked)

• Custom Groups (CG):

On (ON): Send custom groups to transmitters during sync

Off (OFF): Do not send custom groups (reduces sync time)

15