Castelle UF-490 appendix Sleep Mode

Customizing Your Machine

Fax Parameter Table

No.	Parameter	Setting	Setting		Comments
		Number
34	ENERGY SAVER	1	Off	To reduce the power consumption in standby, select either
	MODE			Energy-Saver or Sleep mode and specify the Delay Time
		2	Energy-
				(1 to 120 minutes) for the machine to enter into the
			Saver
				selected mode.
		3	Sleep	The Delay Timer setting is only available in the Energy-
				Saver or Sleep Modes.
				Off	: The unit will remain in standby
					mode and consume more energy
					than when in Energy-Saver or
					Sleep modes.
				Energy-Saver Mode : Saves energy by consuming less
					power than when in standby mode
					by turning off the fuser unit after the
					specified time.
				Sleep Mode	: This is the lowest power state that
					the machine enters after the
					specified time without actually
					turning off.
35	DAYLIGHT TIME	1	Invalid	Selecting whether the clock adjusts for Daylight Saving
				Time automatically. The built-in clock will advance 1 hour
		2	Valid
				at 1:00 am on the last Sunday in March and fallback 1 hour
				at 1:00 am on the last Sunday in October.
38	ACCESS CODE		(----)	Enter a 4-digit Access Code to secure the machine from
				unauthorized use. (See page 75)
39	PIN CODE ACCESS	1	None	Selecting the access method (Prefix or Suffix) to dial a
				number with PIN Code. (See page 78)
		2	Suffix
		3	Prefix
47	REMOTE RECEPTION	1	Invalid	Selecting whether or not the machine accepts the remote
				reception command. (See page 58)
		2	Valid
48	TELEPHONE LINE	1	PSTN	Selecting the type of line connected.
		2	PBX
49	PSTN ACCESS CODE		(----)	Setting PSTN Access Code. (max. 4 digits)
51	REMOTE	1	Invalid	Selecting whether or not the machine accepts to update
	DIAGNOSTIC			the firmware or	Remote Diagnostics from the remote
		2	Valid
				station. Please ask your Panasonic Authorized Dealer for
				details.
52	DIAGNOSTIC		(----)	Setting the password for Remote Diagnostic Mode. Please
	PASSWORD			ask your Panasonic Authorized Dealer for details.
53	SUB-ADDRESS		(----)	Setting a 20-digit password for secured sub-address
	PASSWORD			communication.
54	FAX FORWARD	1	Invalid	Selecting whether the machine performs Fax Forwarding
				to the specified destination. (See page 80)
		2	Valid
57	COUNTRY CODE			Selecting the country code when installing your machine.
58	LANGUAGE			Selecting the language to be shown on the display and
				reports.

Continued on the next page...

Programming Your Machine

35