Castelle UF-490 appendix Setting the Fax / Tel Auto Switching Mode, If it is a Fax call

Receiving Documents

Fax / Tel Auto Switching Mode

When your machine is set to this mode, your machine will switch to document reception or voice communication automatically.

Setting the Fax / Tel Auto Switching Mode

1	Change Fax Parameter No. 17 (RECEIVE MODE) to 3: Fax / Tel
	SW. (See page 33)

Operation of Fax / Tel Auto Switching Mode

If it is a Fax call,

1	Your machine will answer the call when a call is received,
	then distinguish whether it is a voice or fax call.
2	Your machine begins to receive the documents.
If it is a Voice call,
1	Your machine will answer the call when a call is received,
	then distinguish whether it is a voice or fax call.
2	Your machine begins to signal (ringing) through the
	machine’s speaker for your attention. (See Note 1)
3	Lift the handset of the External Telephone and press
			.
		STOP
4	Begin the conversation.

NOTE	1 The length of time the machine signals can be changed by Fax Parameter No.18 (OP CALL
	TIMER). (See page 33)

2 To adjust the Ringer Volume refer to page 21.

Basic Operations

59