PRINTING IN PHOTO MODE

photograph

4

Press the paper type key to select the type of paper being used.

The paper type is shown here.

Place the original into the document bay face down. Press the start/stop key to begin printing.

photo mode

Press the mode key to set the printer in photo mode. Select the desired output size and level of contrast.

'PHOTO' is shown here.

Points to note when using photo mode

Text portions are sometimes printed in slightly lighter colors. If this happens, set the print contrast to a darker position.

White areas on photographs may appear with dot-shaped blotches in the print.

If this happens, set the print contrast to a lighter position.

Horizontal and/or vertical lines may appear at regular intervals on the print. This is normal and does not indicate an error in the printing process.

Yellow portions of photographs are sometimes poorly reproduced.

Printing speed in photo mode is slower than that of normal mode.

16

Page 18
Image 18
FujiFilm 3000 manual Printing in Photo Mode, Points to note when using photo mode